The Alphacool Dominator RAM water block is one of the few RAM water block, which utilize the RAM heatspreader for cooling.
Copper cooling plate and Acetal top create the typical Alphacool design, and a well-engineered mounting mechanism allows quick, easy and safe installation of the unit: Remove the old passive cooling fins, usually fixated by 3 hexagonal socket screws, then remove the top piece and the old thermal compound. Now apply new thermal compound ad fixate the water block with the screws from the passive heatsink – Done!
Designed for up to 4 neighboring RAM slots, this water block can of course also be used with less slots / RAM modules. At least 2 RAM modules are needed for installation. On Mainboards with 2 slots, the water block protrudes a bit on the sides, but works just fine!
Even at low flow rates of less than 60l/h, this water block achieves exceptional cooling performance.
Connection thread size: 2x ¼“
Dimensions (L x W x H): 45,25 x 127,55 x 16,2mm
RAM modules: Up to 4 pcs.
Compatible with these RAM coolers
Extent of delivery:
1x Alphacool Dominator RAM water block
Note: Thermal compound not included. We recommend Alphacool Silver Grease 0.5g (Item No. 12715) to be ordered with this water block to allow installation.